The work

Four disciplines. One standard.

Interior, exterior, cabinet refinishing, and staining — priced as fixed bids, scoped in writing, executed to the Good-as-Gold standard.

01 / Interior

Interior Painting

Our interior process starts with drop cloths on every surface you care about, a walkthrough to mark repairs, and a conversation about sheen and color. We caulk nail holes, skim texture mismatches, prime bare spots, and brush cut-lines the way a cabinetmaker draws a line — slow, steady, and straight.

Drop cloths, plastic masking, outlet & fixture protection
Patching, caulking, and priming as part of the fixed bid
Sherwin-Williams or Benjamin Moore — your choice, documented
Cut lines by hand, rolled finishes, spray on request

Exterior Painting

Exterior is where prep is the entire job. We pressure wash, scrape failing paint, sand, caulk every seam, replace rot, and prime bare wood before a single drop of finish coat goes on. Then we apply Sherwin-Williams Duration or Emerald — documented in your contract — for an eight-to-twelve-year finish in Arkansas weather.

Full pressure wash & scrape — never painted over failure
Carpentry repair on rotted trim and siding included when needed
Caulking of every seam, primer on every bare surface
Premium Sherwin-Williams systems, documented in the bid

Cabinet Refinishing

Cabinets are the single best painting investment in a home. We remove every door and drawer, sand and degrease every surface, spray-prime in a dust-controlled environment, and finish with a durable cabinet enamel that cures harder than brush-on paint. Reinstalled with labeled hardware so nothing gets lost.

Doors & drawers removed, labeled, and refinished off-site
Degreasing, bonding primer, and two enamel coats minimum
Sprayed finish — no brush marks, no orange peel
Typical kitchen turnaround: 5–7 working days

Staining

Stain is a different craft from paint. It works with the wood instead of covering it. We clean, brighten, and sand decks back to raw wood; we spot-strip interior wood where needed; we flood-coat and back-brush so the stain sits in the grain evenly. The difference is visible three years later.

Deck cleaning, brightening, and full sanding where needed
Sikkens, Armstrong-Clark, or Cabot — chosen for your substrate
Flood-coat + back-brush application, two coats standard
Interior wood stain & clear-coat available